The Method for Treating Mud Water with Anionic Polyacrylamide Pam

Mud water is not a kind of wastewater which is difficult to treated. As long as the appropriate treatment process and water treatment chemicals are combined, the purification is not difficult. The purpose of this paper is to introduce the type and composition of the mud water as well as the polyacrylamide agents needed, so that you can find the appropriate water treatment agents more quickly and accurately.

Mud water is a kind of suspended liquid containing a certain amount of fine mud particles. Its characteristics mainly depend on its composition, which is related to the local geology. Generally, the appearance of it is yellowish brown, and its pH value is 6-7. In addition, it has a certain viscosity, and the specific gravity is between 1.20 and 1.46.

From the source, the main sources of mud water are building pilings, sand fields, tunnel drilling, mine tailings, etc. Anionic polyacrylamide pam with relatively high molecular weight is usually used for mud water treatment. Before using, it needs to be diluted and prepared with water. Usually, the preparation ratio is 1 kg, and the reagent can be dissolved with one ton of water. It can not be directly added into the water because of poor site construction conditions or other reasons, which will not only not play the role of anionic polyacrylamide pam, but also produce adverse effects.

In the treatment of mud water, the anionic polyacrylamide pam produced by Beijing Sinofloc Chemical Co.,Ltd. has great treatment advantages. After adding the corresponding agents produced by our company, it can flocculate and agglomerate well with mud clay, destroy the stability of mud water, and make the mud particles quickly agglomerate and sink from the water, so as to achieve the separation effect of mud and water.